U*GB/COLL/7914 - Guide Bush Collar 7.9mm to 14.28mm
Stock Level In Stock
Aluminium collar to fit guide bushes.
- Enables single shaped templates to be used to cut perfectly matching pocket & inlay.
- Collars have integral rubber 'O' rings to ensure collar secures onto guide bush.
- Templates should be made with suitable sized corners for the collar being used.
- The correct diameter straight cutter as indicated should always be used.
- 5/16" (7.9 mm)
- 9/16" (14.3 mm)
- Use with guide bush dia
- 5/16" (7.93 mm)
- Use with bit dia.
- 1/8" (3.2 mm)
no spare products