We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Frequently Asked Questions
How do I know I have a proper seal around the face when using Airshield powered faceshield?
The face seal should be pulled in towards the face and away from the visor. Do not be overly worried about this. The Airshield is a powered visor and therefore the pressure inside the visor is greater than the exterior so it is not possible for dust to leak into the breathing zone.
Created by Trend Support Team
Was this article helpful ?
Category
- Routers FAQs
- Router Cutters FAQs
- Safety & PPE FAQs
- Tool Storage FAQs
- Routing Workshop Jigs FAQs
- Router Tables FAQs
- Routing On-site Jig FAQs
- Routing Accessories FAQs
- Dust Extraction FAQs
- Power Tool Accessories
- Drilling FAQs
- Trend Snappy FAQs
- Clamping FAQs
- Abrasives FAQs
- Sawblade FAQs
- Planer, Jigsaw & Multitool FAQs
- Sharpening & Tool Care FAQs
- Measuring & Hand Tools FAQs
- CNC Machining FAQs
- Catalogues & Books FAQs
- Spare Parts FAQs
Tags
- Routing (34)
- Clamping (1)
- product (7)
- (29)
- Compatibility (25)
- Sharpening (2)
- Sharpening (3)
- Screws (3)
- Countersinks (3)
- Substances (3)
- Filters (8)
- Materials (10)
- Radius (4)
- Replacement (3)
- Jointing (14)
- Kitchen Fitting (10)
- Cutting Speed (1)
- Smartbench (1)
- Scribing (1)
- Respirators (17)
- Shipping (1)
- Respirators (1)
- Repair (1)
- Life expectancy (1)
- Dividers (1)
- Batteries (4)
- Biscuit Jointing (4)
- Jig Making (1)
- CNC Machining (7)
- Templating (1)
- Repairs (1)
- Holding The Workpiece (1)
- Cutter Sets (1)
- Bearings (1)
- Mortise & Tenon (1)
- Auger Bits (1)
- Flat Bits (1)
- Drilling (1)
- Hex Keys (1)
- Plug Cutters (1)
- Drill Bit Guides (1)
- Door Fitting (18)
- Grub Screws (1)
- Kitchen Fitting (2)
- Cleaning (3)
- Accessories (1)
- Power Wattage (1)
- Container Volume (1)
- Noise Rating (1)
- Cleaning (2)
- Templates (1)
- Stair Jig (4)
- T Slot Track (1)
- Parallel Groove (1)
- Bore Size (1)
- Modification (1)
- Maintenance (6)
- Modification (3)
- Rebating (1)
- Jointing (2)
- Torx Screw (1)
- Line-up Pin (3)
- Guide Bush (4)
- Materials (3)
- Replacement (1)
- Countersinks (1)
- Thread (2)
- Measurements (1)
- Angle (1)
- Routing (1)
- Contents (1)
- Door Fitting (1)
- storage (1)
- guide bushes (1)
- worktop (6)
- collet (1)
- spindle moulding (1)
- bearing (1)
- rpe (2)
- hinges (2)
- door (1)
- Frames (1)
- Hinges (2)
- Worktop (6)
- Filter (1)
- Protection (1)
- Dust Extractor (2)
- Warranty (1)
- Router Table (2)