Group

Frequently Asked Questions

Dust Extraction FAQs

Frequently Asked Questions about Dust Extraction

The part number for T35A is WP-T31/020. The Part number for T32 & T33A is WP-T33/095.

... Read more

The part number for T35A is WP-T31/027. The part number for T32 & T33A is WP-T32/050.

... Read more

The maximum power tool wattage on the T30 is 2000 watts.

... Read more

The T30 cartridge filter dimensions are OD 151mm, ID 115mm and length 187mm.

... Read more

The container volume is 34 litre dry and 25 litres wet.

... Read more

Net capacity is 12.6 litres.

... Read more

The T30AF has the filter T30/5 0.5 micron filter and T30/3 pre filter fitted in place of T30/6 12 micron filter.

... Read more

The noise is rated at 85db(a) when in use.

... Read more

It can be used for normal cleaning operations. But for fine dust a bag should be used to aid cleaning out the unit and prolong the machines life. The paper bag also increases the life of the cartridge filter.

... Read more

The WP-T35/041 bayonet fitting can be easily removed by using a flat-bladed screwdriver pushed into the two tabs on each side of the fitting this releases the nozzle from the hose.

... Read more

We no longer keep bags for the T30 there is a company that still supplies an equivalent online. https://www.vacuumcleanerbags.co.uk/Trend__T30AF-vacuum-bags-1.html

... Read more

Yes. with the use of part number CRT/3.

... Read more

No, the T30/22 replaces the hose that comes with the T30 and will fit straight onto the CRT tables.

... Read more

It can be used for normal cleaning operations. But for fine dust a bag should be used |to aid cleaning out the unit and prolong the machines life. The paper bag also increases the life of the cartridge filter.

... Read more

Some of the accessories will fit, but some will not. The T31 tubes, floor kit, crevice tool, round brush and power tool stepped spout will fit the T30 hose spout and tubes and vice-versa. The T31 no foam filter, cartridge filter, dust bags will not fit T30 and vice-versa. The T31 hose with a bayonet is too tight a fit into the T30 container and may split the outlet on T30.

... Read more