U*GB/COLL/2040 - Guide Bush Collar 20mm to 40mm
U*GB/COLL/2040
Aluminium collar to fit guide bushes.
- Enables single shaped templates to be used to cut perfectly matching pocket & inlay.
- Collars have integral rubber 'O' rings to ensure collar secures onto guide bush.
- Templates should be made with suitable sized corners for the collar being used.
- The correct diameter straight cutter as indicated should always be used.
- ID
- 20 mm
- OD
- 40 mm
- Use with guide bush dia
- 20 mm
- Use with cutter dia.
- 10 mm
no spare products
