U*QR/SET/2 - Quick Release 60 Piece Set in Toolholder


Stock Level In Stock

Heavy duty fabric tool holder with a selection of assorted Craft Pro tools.

  • Magnetic Quick Chuck which is fitted into a standard 3/8-inch key or keyless chuck and allows any direct drive 1/4-inch hex bits to then 'snap' in effortlessly.
  • Metric flat bits 16mm, 19mm, 22mm, 25mm and 30mm diameter.
  • Metric auger bits 10mm and 13mm diameter.
  • Metric hex drill bits 1.5mm, 2mm 3mm, 4mm, 5mm, 6mm and 7mm diameter.
  • Drill bit guides 5/64-inch and 7/64-inch for hinges.
  • Drill countersinks with 3/32-inch (No.6), 1/8-inch (No.8) and 9/64-inch (No.10) drill bits.
  • Twenty-three 1-inch insert bits Pozi, Phillips, slotted, Torx and hex.
  • Three Pozi 2-inch screwdriver bits.
  • Magnetic bit holder with retractable barrel.
  • Metric magnetic nut drivers for 6mm, 8mm, 10mm and 12mm A/F bolts.
  • Square drive adapters 1/4-inch, 3/8-inch and 1/2-inch A/F.
  • Metric Tungsten Carbide Tipped masonry drills 5mm, 6mm, 7mm and 8mm diameter.
  • Deburr countersink and hole enlarger tools.
  • Set supplied in tool holder with elasticated pockets to hold quick change shank and belt strap and are hook and loop fastening.
11 3/4 inch x 6 1/2 inch
Tools up to 6 inch
Tools up to 3 inch
Screwdriver insert bits
Quick chucks
Belt strap

no spare products


Quick Release 30 & 60 Piece Sets

Product Questions

Write Your Own Question
Your Question: