U*GB/COLL/1630 - Guide Bush Collar 16mm to 30mm


Stock Level In Stock

Aluminium collar to fit guide bushes.

  • Enables single shaped templates to be used to cut perfectly matching pocket & inlay.
  • Collars have integral rubber 'O' rings to ensure collar secures onto guide bush.
  • Templates should be made with suitable sized corners for the collar being used.
  • The correct diameter straight cutter as indicated should always be used.
5/8" (16 mm)
1-3/16" (30 mm)
Use with guide bush dia
5/8" (16 mm)
Use with bit dia.
9/32" (7 mm)

no spare products

Product Questions

Write Your Own Question
Your Question: