U*46/210X1/2TC - Guided 90 degree trimmer 1/2 inch diameter 1 1/2 inch length
U*46/210X1/2TC
Self-guiding trimmers with bearings mounted on end of cutter.
- For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
- An approximate 3mm overlap should be left before copy profiling.
- When using plastic laminate adhesive to dry before trimming.
- This avoids clogging the guide bearing.
- D
- 1/2 inch
- C
- 1 1/2 inches
- B
- 1/2 inch
- A
- 90 degrees
- OL
- 3 55/64 inch
- Shank Diameter
- 1/2 inch
- California Prop 65
- See below for Safety Link - Wood Dust
no spare products